Search found 10 matches

by rohanahmed
Wed Apr 09, 2025 6:34 am
Forum: Kizashi Technical Support & Problem Troubleshooting
Topic: Need Help with Water Pump
Replies: 3
Views: 3062

Re: Need Help with Water Pump

Hi, I am an owner of a Suzuki Kizashi 2013 2.4L CVT AT and I'm in desperate need of help on where I can purchase water pump set for my Kizashi. I have looked up in megazip.net and other websites but there's no luck. I hope somebody can point me to the right direction. I might need transmission gear...
by rohanahmed
Wed Apr 09, 2025 6:28 am
Forum: Kizashi Technical Support & Problem Troubleshooting
Topic: Engine cooling fan not engaging when engine is at 101°c
Replies: 10
Views: 3825

Re: Engine cooling fan not engaging when engine is at 101°c

I have a 2011 S Kizashi, 288000km . Fan turns on only at high speed once coolant temperatures reaches 108 degrees Celsius. Fan turns off around 102 degrees and the temperature goes down to 100 degrees. Only main fan operates when I tested coolant temperaute under idle condition. When i drive with AC...
by rohanahmed
Sat Aug 19, 2023 5:37 am
Forum: Kizashi Technical Support & Problem Troubleshooting
Topic: Service engine, hill hold disabled & ESP error messages FIX
Replies: 15
Views: 51323

Re: Service engine, hill hold disabled & ESP error messages FIX

I think my plan of attack would be to make sure it’s not a battery issue by trying another battery if you can and making sure battery is up. If your scan tool has the ability to read data I would hook that up erase the codes and watch data on the ABS computer mainly watching speed sensor readings o...
by rohanahmed
Sat Aug 19, 2023 5:27 am
Forum: Kizashi Technical Support & Problem Troubleshooting
Topic: P050A and P0335A - Idle Air Control Valve
Replies: 5
Views: 9741

Re: P050A and P0335A - Idle Air Control Valve

Hi, Have you solve this issue on your Kizashi? I'm having the same problem with my Kizashi 2010 - the code P050A is causing me some issues, and my mechanic recommended me to replace it. Here is the part number of the idle air control valve. Hope it helps. ACTUATOR INTK CONTROLLER VALVE - 13471-80J0...
by rohanahmed
Sat Aug 19, 2023 5:18 am
Forum: Kizashi Technical Support & Problem Troubleshooting
Topic: Rough Idle
Replies: 6
Views: 6392

Re: Rough Idle

Hi All, Sorry for my late reply, we have had some crazy weather here in Australia. Thanks you for the suggestions, after some engine bay checks I noticed that a bolt had fallen out of the intake manifold. Not sure what the part is that was half hanging off with just one bolt letting air in, but ive...
by rohanahmed
Thu Jun 15, 2023 8:59 am
Forum: Kizashi Technical Support & Problem Troubleshooting
Topic: Fluid Change - Transmission Trouble
Replies: 10
Views: 18682

Re: Fluid Change - Transmission Trouble

I agree, sounds like the P0641 code is the only one that matters. I'd guess a fuse has blown, a connector wasn't plugged back in, or a wire has broken. Codes are: P0842: Transmission Fluid Pressure Sensor / Switch “A” Circuit Low Primary pressure sensor signal circuit voltage is lower than specifie...
by rohanahmed
Thu Nov 17, 2022 6:52 am
Forum: Kizashi Technical Support & Problem Troubleshooting
Topic: FYI (Hill Hold Disable + Engine Light On + Cruise control stopped working)
Replies: 7
Views: 23256

Re: FYI (Hill Hold Disable + Engine Light On + Cruise control stopped working)

I just discovered this thread and we run into this exact same issue when the temperature is just in a certain range or when the wife has parked the car at the train station while at work. I've discovered in our case it is related to temperature, but that's all I've figured out so far. It seems like...
by rohanahmed
Mon Nov 07, 2022 7:18 pm
Forum: Kizashi Technical Support & Problem Troubleshooting
Topic: Service engine, hill hold disabled & ESP error messages FIX
Replies: 15
Views: 51323

Re: Service engine, hill hold disabled & ESP error messages FIX

I think my plan of attack would be to make sure it’s not a battery issue by trying another battery if you can and making sure battery is up. If your scan tool has the ability to read data I would hook that up erase the codes and watch data on the ABS computer mainly watching speed sensor readings o...
by rohanahmed
Wed Nov 02, 2022 6:42 am
Forum: Kizashi Technical Support & Problem Troubleshooting
Topic: Service engine, hill hold disabled & ESP error messages FIX
Replies: 15
Views: 51323

Re: Service engine, hill hold disabled & ESP error messages FIX

Hi guys, i have a suzuki Kizashi 2011 225k km driven. I am facing a similar issue as I am getting the same warning messages mentioned here. My codes are as followed P0101, C1091, B1505 and B1504 The car starts well, runs and idle smooth. My question is what if the codes repeat even after replacing t...
by rohanahmed
Tue Jun 21, 2022 6:33 am
Forum: Personal Classifieds
Topic: Looking for: Rear Shock Mount, 2012 Kizashi w/out AWD
Replies: 5
Views: 28326

Re: Looking for: Rear Shock Mount, 2012 Kizashi w/out AWD

OliverB wrote: Thu Jan 16, 2020 9:15 pm I have two complete mounts in a drawer.
Do you still have those chock mounts? Where can I find it in GTA, Canada?