(USA) Kizashi OBD-II protocol is CAN
Posted: Wed Dec 14, 2011 4:16 am
(Because I had to know this, and could not easily find it in the user manual, online searches, etc)
From what I see in the OBD connector (under driver's side dash, on the left near the hood release), it has pins 4,5,6, 14 and 16, which == CAN protocol.
(In theory, my OBD-II reader, Cartool U381, can read CAN, but it is not for some reason, which is a different problem I have to suss out)
From what I see in the OBD connector (under driver's side dash, on the left near the hood release), it has pins 4,5,6, 14 and 16, which == CAN protocol.
(In theory, my OBD-II reader, Cartool U381, can read CAN, but it is not for some reason, which is a different problem I have to suss out)