Kizashi Club

Posted: **Tue Apr 08, 2014 11:21 pm**

I want to debadge the S and

the kizashi on the back. Does it have holes , is it easy to remove ? How about installing LED inside. Do I use a flat screwdriver and use pop it open?

Posted: **Wed Apr 09, 2014 1:29 am**

No holes behind the badge

LEDs have been done many times so there should be some info if you search. The covers pop off with a small flathead

Posted: **Wed Apr 09, 2014 2:14 am**

To remove the badge I just use a knife or flat screw driver? Is it with that glue?

Posted: **Wed Apr 09, 2014 5:01 am**

There are a couple threads on replacing the interior bulbs with LEDs.

http://Www.superbrightleds.com has everything you need, including the fuse type in the vanity mirrors.

As for debadging ... Dental floss

Posted: **Wed Apr 09, 2014 5:57 am**

Dthrill_08 wrote:To remove the badge I just use a knife or flat screw driver? Is it with that glue?

There are a lot of video in youtube showing how to debadge.
Here is an example:

Posted: **Wed Apr 09, 2014 5:58 am**

Dthrill_08 wrote:To remove the badge I just use a knife or flat screw driver? Is it with that glue?

Heat gun or hair dryer to warm up the adhesive, then pry it off with something that won't scratch your paint (credit card, dental floss, fishing line, etc)

Kizashi Club

debadging and LED in dome.

debadging and LED in dome.

Re: debadging and LED in dome.

Re: debadging and LED in dome.

debadging and LED in dome.

Re: debadging and LED in dome.

Re: debadging and LED in dome.