Page 1 of 1

Stereo Installation

Posted: Sat Mar 17, 2012 6:58 pm
by Runner
I purchased my Kizashi without any audio system. I want to install my own system. I have removed the AC control panel, but am having trouble removing the upper panel, where the audio unit will go. Also, I don't see the wiring harness that should provide me access to power, ground, and the speaker wiring. Anyone have any information regarding this?

Re: Stereo Installation

Posted: Sun Mar 18, 2012 1:02 am
by ~tc~
Search, there are several threads on this with the part numbers for the scoche harness and everything

Re: Stereo Installation

Posted: Mon Mar 19, 2012 1:41 am
by Runner
Yeah, I have the Scosche harness. It gets wired to my stereo unit and has a male plug that mates with the female receptacle in the car. It was the female receptacle that I couldn't locate. In the space where a double din stereo unit can go, I had a plastic pocket and a blank panel. It turned out that the car's receptacle was connected to the back of the pocket. I have since installed my stereo unit, and it is working great.

Re: Stereo Installation

Posted: Fri Jul 13, 2012 3:29 pm
by BxKizashiS
The upper panel is held by 2 screws on each corner. Wish I could take a pic but u can't miss it. Use a flashlight. U might need a extended Phillips screwdriver. Then once those 2 screws are out you pop it out like u did the AC panel