Greetings everyone! I apologize in advance if this has been covered before. I've noticed that when I push the AC switch on my dash, the air does not get any colder than when the AC is off. The compressor does come on and I can see that my RPMs go up by about 200 while idling. There seems to be plent...

I've got a kit that I purchased from Amazon that goes to 5k and I'm thinking about touching my headlights up with it very soon. I already have a can of clear coat to finish with

I've got everything tidied up so I don't believe that there is anything stopping the housing from moving

Any reason as to why I can't adjust the beam pattern? My adjustment screws move but nothing happens to the beam pattern

P0443 has to do with the purge valve back by the gas tank. If it stopped when you changed the spark plugs that was pure coincidence. Might have just been a loose gas cap, but this whole system is subject to a recall. https://kizashiclub.com/forum/viewtopic.php?f=13&t=5144 The odd thing is that ...

Quick update on my HID setup. I had the headlights off to change out the turn signals and went ahead and properly seated the bulbs. My beam pattern is much better but I definitely need to order the B type bulbs since the return wire shadow is very noticeable now.

I have finally started to do all of the standard maintenance that I haven't done yet. I was getting the P0443 code at least once or twice a week for quite a long time, I hate to admit. I changed the spark plugs two weeks ago and this code (nor any other code) has popped back up. I went past the 60,0...

Nope, but I'm interested as my HIDs have a very different beam pattern than the stock halogens. The stock pattern was almost straight across. The HIDs have two high points like an ocean wave. This is the same problem that I am having. I can still see much better at night but I would still very much...

I've also noticed burnoff from Mobil 1. I will definitely give the Super Tech a go when I change my oil

I installed the Morimoto Elite HID kit for my low beams and a set of GTR Lighting LEDs for my high beams. I removed the cover piece for the L/R adjustment screw but when I go to adjust my lights, the beam pattern does not move in any direction. The adjustment screws turn but do nothing for the beam ...