Yep i'm in France, Europe. However Since 2011, DRLs are mandatory for all new cars and small delivery vans in the EU. Trucks and buses followed in August 2012. Vehicles produced before don't have to be retrofitted. The car is imported from Germany, so it should have DRL ! (car made in october 2013)...

The center speaker is connected to the front speakers/tweeters:




Verzonden vanaf mijn iPhone met Tapatalk

Yes best is to do that. Thank you


Verzonden vanaf mijn iPhone met Tapatalk

Ok with the 9 wired cable I need to add RCA so I think its better to just buy RCA with remote cable and cut one side to fit amp. https://uploads.tapatalk-cdn.com/20231001/22fb3892ad188d0b492edb9b46a354c3.jpg Can I split the rca? And the shield is stil there if I cut the rca? It seems like its shield...

Oops Yes I knew that


Verzonden vanaf mijn iPhone met Tapatalk

Yes that would be the easiest way. Let me get this straight.

Use factory for tweeter.
2 new wires for both woofers in door.
2 new wires for center, whats the difference between RF center?
And extra wires from sub to amp.
And rear use factory

Verzonden vanaf mijn iPhone met Tapatalk

Ok I saw a 9 wired harness special made to run from amp to audiounit. (8 for speakers 1 for turn on signal) I could just simply pull out the door cover but asking here is just as simple. In the wire diagram the speakers in the front all are combined and 4 wires run to the audiounit. My question is w...

SAEED_KIZZY wrote: ↑Thu Sep 28, 2023 5:52 pm I bought the same wire harness as OE(one for the front and one for the rear I think) and connected the shield to the ground point(white Connector near AMP)

That sound good. Do you know were I could buy that?

@Klaa$vaaK, those are audio in of AMP and covered with shield signal connected to body ground all of this info is shown in the wiring diagram. you need to read the service manual for more information and signal description. Ok and were does the connection for the ground is in the car? The ground co...

Is the wiring for the rf system integrated in the oem wiring harness? Yes, it is integrated You have to order the whole wiring harness which is impractical and super expensive. you have to build a wiring harness and also need connectors for RF AMP in my case I bought the AMP with a mating connector...