Search found 8 matches
- Sat Aug 19, 2023 5:37 am
- Forum: Kizashi Technical Support & Problem Troubleshooting
- Topic: Service engine, hill hold disabled & ESP error messages FIX
- Replies: 10
- Views: 13822
Re: Service engine, hill hold disabled & ESP error messages FIX
I think my plan of attack would be to make sure it’s not a battery issue by trying another battery if you can and making sure battery is up. If your scan tool has the ability to read data I would hook that up erase the codes and watch data on the ABS computer mainly watching speed sensor readings o...
- Sat Aug 19, 2023 5:27 am
- Forum: Kizashi Technical Support & Problem Troubleshooting
- Topic: P050A and P0335A - Idle Air Control Valve
- Replies: 5
- Views: 7253
Re: P050A and P0335A - Idle Air Control Valve
Hi, Have you solve this issue on your Kizashi? I'm having the same problem with my Kizashi 2010 - the code P050A is causing me some issues, and my mechanic recommended me to replace it. Here is the part number of the idle air control valve. Hope it helps. ACTUATOR INTK CONTROLLER VALVE - 13471-80J0...
- Sat Aug 19, 2023 5:18 am
- Forum: Kizashi Technical Support & Problem Troubleshooting
- Topic: Rough Idle
- Replies: 6
- Views: 2707
Re: Rough Idle
Hi All, Sorry for my late reply, we have had some crazy weather here in Australia. Thanks you for the suggestions, after some engine bay checks I noticed that a bolt had fallen out of the intake manifold. Not sure what the part is that was half hanging off with just one bolt letting air in, but ive...
- Thu Jun 15, 2023 8:59 am
- Forum: Kizashi Technical Support & Problem Troubleshooting
- Topic: Fluid Change - Transmission Trouble
- Replies: 10
- Views: 2069
Re: Fluid Change - Transmission Trouble
I agree, sounds like the P0641 code is the only one that matters. I'd guess a fuse has blown, a connector wasn't plugged back in, or a wire has broken. Codes are: P0842: Transmission Fluid Pressure Sensor / Switch “A” Circuit Low Primary pressure sensor signal circuit voltage is lower than specifie...
- Thu Nov 17, 2022 6:52 am
- Forum: Kizashi Technical Support & Problem Troubleshooting
- Topic: FYI (Hill Hold Disable + Engine Light On + Cruise control stopped working)
- Replies: 7
- Views: 17477
Re: FYI (Hill Hold Disable + Engine Light On + Cruise control stopped working)
I just discovered this thread and we run into this exact same issue when the temperature is just in a certain range or when the wife has parked the car at the train station while at work. I've discovered in our case it is related to temperature, but that's all I've figured out so far. It seems like...
- Mon Nov 07, 2022 7:18 pm
- Forum: Kizashi Technical Support & Problem Troubleshooting
- Topic: Service engine, hill hold disabled & ESP error messages FIX
- Replies: 10
- Views: 13822
Re: Service engine, hill hold disabled & ESP error messages FIX
I think my plan of attack would be to make sure it’s not a battery issue by trying another battery if you can and making sure battery is up. If your scan tool has the ability to read data I would hook that up erase the codes and watch data on the ABS computer mainly watching speed sensor readings o...
- Wed Nov 02, 2022 6:42 am
- Forum: Kizashi Technical Support & Problem Troubleshooting
- Topic: Service engine, hill hold disabled & ESP error messages FIX
- Replies: 10
- Views: 13822
Re: Service engine, hill hold disabled & ESP error messages FIX
Hi guys, i have a suzuki Kizashi 2011 225k km driven. I am facing a similar issue as I am getting the same warning messages mentioned here. My codes are as followed P0101, C1091, B1505 and B1504 The car starts well, runs and idle smooth. My question is what if the codes repeat even after replacing t...
- Tue Jun 21, 2022 6:33 am
- Forum: Personal Classifieds
- Topic: Looking for: Rear Shock Mount, 2012 Kizashi w/out AWD
- Replies: 5
- Views: 12298