well its been 10,000kms now with the BBK and all is well i can see why TRD recommended 19" wheel i had my winters put on and the weights woud hit the caliper so the useds smaller weights and more off them to clear the calipers. other than really bad brake dust on the car s front wheels i would ...

I think I have a slightly warped front Rotor. I am thinking on going all slotted in the front and maybe regular in the back. My question is does the Kizashi maintain it's great breaking? It is actually one of my favorite cars in the breaking department. In the future I would like to drop it a bit a...

kizashir rear brakes are shit mine seize once a year i have to get the slides serviced the indicator they are seized is the dust on the rear wheels my big brake kit gives a lot of dust and the fronts do have shields

any update has the car settled any lower or have you gotten rims? im not sure if i want to go HR or BG

Sam is right i have both diagrams of the Kizashi rear they are identical except for the hub to support the axles and the AWD is only 250lb max more the tech told me but yes because of the weight differance the spring rate is higher just think of it as having 2 125lb chicks in the back at all times

still got to make 2 minor adjustments 1 is put either a flat washer or a lock washer for the bolts and get low dust pads the pads it came with are making my 2 front wheels black and look like shit.

also the spacers used were 0.550" and made of 304 stainless STEEL lol

says it fits 2008 to 2014

part# PTR09-52080

if you google that part number it will show you some that you can purchase

My exhaust

STEP 5 FRUIT OF YOUR LABOUR 20150613_162634.jpg 20150613_162715.jpg 20150612_202550.jpg 20150612_202602.jpg 20150612_203024.jpg 20150612_203015.jpg SPRAY EVERYTHING DOWN WITH BRAKE CLEAN 20150614_160111.jpg ** MAKE SURE YOU BEND YOUR DUST SHIELD ON THE BACK IT WILL RUB ON THE ROTOR** STEP 6 GRAND FI...

** EDIT** 15759818_large.jpg STEP 4 CONTINUED** **BRAKE LINES** ** Post side note** (When you remove you lines the new line will fit the kizashi line you will have a hard time getting the clip that holds the line in place back on, have not figured out what i want to do so I tapped it on with hammer ...