Does your vehicle have the covers? Refer to this thread: https://www.kizashiclub.com/forum/viewtopic.php?f=32&t=2140 Also, always check first to make sure the bulbs are seated properly and the headlight secured to the car properly before making any headlight adjustments. Nope, L R screw is visi...

Hello guys, I recently installed HIDs in the projectors. I need help adjusting the focus of the lights. The screw to move the lights left or right does not do anything, mechanic said the screw is broken. How can I adjust the low beams? The light points too far leftward. Also, how can I adjust the hi...

KuroNekko wrote: ↑Mon Jan 03, 2022 6:29 pm When my manual transmission Kizashi is at normal operating temperature, it idles at 600 RPM. I believe that is normal.

Yeah, then I believe my MT also idles fine. The engine vibrates though, so i think I need to look into the motor mounts.

I've got the throttle body, sparkplugs and maf checked. Also replaced the valve cover gasket as it was leaking. Still idles around 600rpm and mechanic says since it has an electronic throttle body, idle can't be adjusted. What does your car idle at?

Abdullah wrote: ↑Sun Dec 12, 2021 6:13 am The usual suspects are sparkplugs, throttle body and MAF sensor. Have you inspected them and cleaned them?

Sent from my GM1910 using Tapatalk

Yes, I'm gonna take a look at the throttle body and maf sensor.

It has started to stall out now, does not idle. Need to press throttle to keep the engine running.

As the title suggests. Cold engine idles at ~1500rpm and then it settles down to 600-500rpm, has almost stalled on me a couple of times.

Any help is appreciated.

SAEED_KIZZY wrote: ↑Thu Sep 02, 2021 6:36 am I don't know a cheap fix but here part number for retainer clip 09409-07335

Thank you saeed kizzy, this will help alot. How does this attach on the inside? Do you have any photos?

Hello guys, does any one know any cheap fix for this? Passenger A Pillar trim piece loose from top (see attached) I've tried sticking the inside with double sided tape but eventually it comes out loose. Any help is appreciated, don't wanna buy a new part as it's around 100$ and there are no salvage ...

If you guys use android, there is an app called AdGuard, which blocks all of the ads on chrome or any other browser you use. It isn't available on the playstore though, so you need to install an apk.