My old car was an Impala so

sort of. its actually abs with carbon print vinyl overlayed. the plate frame is real carbon. dont mind the dirt.

The car is an SLS but that is either a base bumper or an SLS bumper from a 2010 model. The correct bumper should have more exxagerated curves and little slits at the bottom outside corners of the fog openings for the chrome strip

Thanks woodie, found the thread, double checked the fuses with a multimeter and problem solved!

This just saved me so much pain and aggravation, i had the exact same problem and checked acc and acc2 and they looked fine then i saw this post and double checked with a multimeter and acc2 was blown! Thank you!

I was pluggin in my car charger into the outlet closest to the radio, and i heard a pop and suddenly there was no power at this point, or at the radio, and my screen says service start system. I did some yoga and climbed under the footwell to check acc1 acc2 and radio fuses, but none looked burned o...

When I look at the cutouts they look like they need about 3 or 4 pipe diameters of clearance off to the side, plus some up and down for the flange. Here is an example: http://thumbs1.ebaystatic.com/d/l225/m/mHazv-GAvurRHQPRIkaXZow.jpg It looks tight further up from that spot. Why would it be better ...

since the kizashi sounds so good straight piped i have been looking at trying to get an electronic cutout.
i was thinking it might fit right here. i havent done any measurements or anything just seeing if anyone has a big reason to scrap the idea

This was definitely what was causing my problem. I just applied a strip of 3m tape on the bottom side of the flange under the gasket and put the gasket over it and the vibration and noise is completely gone. The filter went back into the airbox nice and snug but it closed very nicely without any ex...

could you keep the expired stuff in an archive or something? its nice to have price reference for stuff