Suzuki Kizashi output speed sensor spacer/Shims

Ask technical questions or post on problems/issues related to the Kizashi under this topic. Symptoms and pictures of your problem are a good idea.
NOTE: Any car related technical question can be posted here.
Post Reply
00SecretAgent
Posts: 2
Joined: Tue Jul 12, 2022 10:35 am

Suzuki Kizashi output speed sensor spacer/Shims..?

Does anyone have any knowledge on how many shims "1 or 2" and placement..?

Thank You..!
old tech
Posts: 705
Joined: Mon Apr 23, 2018 1:51 pm
Location: n/w pennsysvania

00SecretAgent wrote: Tue Jul 12, 2022 12:09 pm Suzuki Kizashi output speed sensor spacer/Shims..?

Does anyone have any knowledge on how many shims "1 or 2" and placement..?

Thank You..!
Yes, both the Kizashi and the Sx4 come from the factory with 2 washer/shims between trans case and sensor . Only on the output sensor though. The code is reporting an improper count which near always is belt slip or missing. Belt slip and breakage usually is primary pulley breakage or jamming from broken and peeling ball bearings
Post Reply