I found OEM rear spoiler on Megazip warehouse in UAE and order it.
my car had no rear spoiler so I have to make 4 holes on my trunk to fit spoiler, 2 for 7mm screw and 2 for plastic fastener.
and also I have some difficulties for stop light because it is different from OEM type.
I decided to cut some pieces of spoiler and make it fit to my car stop light.
install OEM rear spoiler
- SAEED_KIZZY
- Posts: 511
- Joined: Wed Sep 13, 2017 2:31 pm
- Attachments
-
- photo_2019-02-02_15-46-05.jpg (43.3 KiB) Viewed 13379 times
-
- photo_2019-02-02_15-45-54.jpg (58.94 KiB) Viewed 13379 times
-
- photo_2019-02-02_15-45-49.jpg (63.35 KiB) Viewed 13379 times
-
- photo_2019-02-02_15-45-31.jpg (62.7 KiB) Viewed 13379 times
-
- photo_2019-02-02_15-46-09.jpg (98.74 KiB) Viewed 13379 times
-
- photo_2019-02-02_15-45-59.jpg (71.25 KiB) Viewed 13379 times
-
- photo_2019-02-02_15-46-56.jpg (87.08 KiB) Viewed 13379 times
- SAEED_KIZZY
- Posts: 511
- Joined: Wed Sep 13, 2017 2:31 pm
Yes OEM spoiler comes with 2 screws with nut and also 2 plastic clips on edge.Kimgraesdal wrote:Did you use screws?
so I have to cut 4 holes in trunk lid.
-
- Posts: 2
- Joined: Sat Mar 02, 2019 7:56 pm
Is it easy, is there any "pre hole" in the trunk
- SAEED_KIZZY
- Posts: 511
- Joined: Wed Sep 13, 2017 2:31 pm
Yes half an hour work I think really easy.Kimgraesdal wrote:Is it easy, is there any "pre hole" in the trunk
No pre holes I had to drill 4 holes.
off course it is better to replace stop light with rear spoiler type to fit this spoiler but it costs 72$ so I decided to use my stop light instead and do some little modification to spoiler to fit.
- SAEED_KIZZY
- Posts: 511
- Joined: Wed Sep 13, 2017 2:31 pm
About a month ago I made a discovery and found this hole and cap on each door
and I do some research and find out this hole use to mount side sill guard and technically can be mounted on my kizashi so I ordered parts and it turn out really fully compatible.to install side sill guards I have to drill some holes in door.
I made a template for guards and use it to drill and it really helped a lot.
there are 4 plastic clips and one bolt and nut for each door. and final results:
and I do some research and find out this hole use to mount side sill guard and technically can be mounted on my kizashi so I ordered parts and it turn out really fully compatible.to install side sill guards I have to drill some holes in door.
I made a template for guards and use it to drill and it really helped a lot.
there are 4 plastic clips and one bolt and nut for each door. and final results:
- Attachments
-
- photo_2019-10-05_21-14-25.jpg (37.9 KiB) Viewed 12014 times
Nice work! Gutsy move to drill holes in perfectly good sheet metal, however, your daring efforts were rewarded.
Ron
2010 Kizashi GTS, CVT, iAWD (3/10 build date)
2011 SX4 Premium Hatch, CVT, iAWD (12/10 build date)
2018 Mazda CX-5 iAWD Touring
2014 Wrangler JKUW (GONE, traded )
1991 Samurai, 5-Speed, EFI, Soft-Top ( sold)
2010 Kizashi GTS, CVT, iAWD (3/10 build date)
2011 SX4 Premium Hatch, CVT, iAWD (12/10 build date)
2018 Mazda CX-5 iAWD Touring
2014 Wrangler JKUW (GONE, traded )
1991 Samurai, 5-Speed, EFI, Soft-Top ( sold)
- SAEED_KIZZY
- Posts: 511
- Joined: Wed Sep 13, 2017 2:31 pm
Thanks RonzukiRonzuki wrote:Nice work! Gutsy move to drill holes in perfectly good sheet metal, however, your daring efforts were rewarded.